CLEANING FUNCTION
PROCEDURE
Although the anti-mineral pad absorbs most of the
lime in the water, the heating plate of the BONECO
S250 experiences calcification after an extended
operating time.
An upcoming need for cleaning is indicated on the
display by the
symbol.
To make descaling easy and convenient, the BONE-
CO S250 is equipped with an automatic cleaning
function. This warms and cools the heating plate
multiple times in order that the lime becomes crum-
bly and can be easily removed.
STARTING THE CLEANING
1. Switch off the BONECO S250 and let it cool down
for 1 hour.
2. Remove the anti-mineral pad and empty the wa-
ter tank.
3. Mix 1 bag CalcOff
with 1 liter (about 1 quart) of
®
warm tap water.
4. Add the mixture to the BONECO S250.
5. Press the
button for 3 seconds to start the
cleaning.
6. Select
the
duration
you
want
(1
to
using the
and
buttons. If stubborn mineral
deposits are left after cleaning, you can always
extend or repeat the cleaning process.
7. Unplug the BONECO S250 and rinse the water tank
with tap water.
8. Place the anti-mineral pad back into the water
tank.
29
en
of
cleaning
9
hours)