MWF MF-90 Manual Del Usuario página 10

CHARGING SUGGESTION
We strongly recommend you to use a quality wall charger when re-charge the probe. It will takes about
3~2 hours to fully charge.
Laptop or desktop computer's USB port produces lower power, which could make the recharging
longer than wall charger.
The probe will stop blinking when it is fully charged. You can leave the USB cable inside the recharge
house after recharging.
Low battery
When the probe flash or indicator light starts to flash regularly,
it means that it needs to be charged. You can continue to use it,
but the sensitivity will be lower.
Remove battery cap
Hold and twist the battery cap anti-clockwise to loosen it.
Hold and twist clockwise to re-tight.
Beware of cross threading the cap and body when tightening
the cap.
Charging instructions
Page
9