Publicidad
Idiomas disponibles
Idiomas disponibles
The device is waterproof to 60M/200FT. It can withstand immersion in 60M/200FT of water for 30
minutes. After submersion, be certain to wipe dry and air dry the device before using or charging.
Do not store the device where prolonged exposure to extreme temperatures can occur because it
can cause permanent damage.
Page
10
1. Use tap water or dampen a clean cloth with a mild
detergent solution.
2. Wipe the device with the damp cloth.
3. Thoroughly dry the device. (Avoid chemical
cleaners and solvents which can damage plastic
components.)
O-RING
1.Clean dust sand and fabric if spotted. Even a tiny
grain of sand will cause water ingress.
2.Apply quality silicone O-ring grease thoroughly.
3.Change O-ring once a year at least. Use qualified
original part only.
PRECAUTIONS
Product maintenance
Publicidad
