Publicidad
Idiomas disponibles
Idiomas disponibles
English
An additional mobile device can only be author‐
ized by entering the selected password. In this
way, the robot mower is secured against unau‐
thorized access.
14 Light patterns on the robot
mower and charging sta‐
tion
14.1
Light strips on the robot mower
The light strips (1 and 2) indicate the robot
mower's status and faults.
White light pattern:
– No active mowing.
Green light pattern:
– Mowing is active.
Blue light pattern:
– The robot mower is receiving a system
update or the system is restarting.
Red light pattern:
– Device lock is active.
– Fault message.
14.2
LED on the docking station
80
1
2
1
14 Light patterns on the robot mower and charging station
The LED (1) indicates the docking station sta‐
tus and faults.
LED (1) lights up white:
– The docking station is operational.
– The robot mower is in the docking station
without active mowing.
– The robot mower is charging without active
mowing.
The LED (1) lights up green.
– The robot mower is being partially
recharged during mowing.
LED (1) lights up red.
– There is a fault.
LED (1) lights up blue:
– Communication with the robot mower.
15 Operating and Adjusting
the Robot Mower
15.1
Control Panel
Use the pushbuttons (1 to 5) to operate the robot
mower's basic functions. The full scope of func‐
tions is available in the MYiMOW
Starting the mowing process
► Press START (3).
The robot mower starts mowing and later
automatically returns to the docking station.
Stopping the mowing process and locking the
robot mower
► Press STOP (1).
The robot mower and the mowing unit stop.
The robot mower is locked.
Sending the robot mower to the docking station
► Press HOME (4).
The robot mower returns to the docking sta‐
tion.
Unlocking the robot mower
► Press LOCK (2).
► Press the displayed key combination.
5
4
3
2
1
®
0458-011-9801-A
app.
Publicidad
