Teac AG-680 Manual Del Usuario página 14

AUDIO OPERATIONS
Recording a Source
Recording Program Source
You can record a program source such as a record or
Compact Disc onto a cassette deck connected to the
TAPE REC jacks.
1
POWER ON
Source
Component
2
1. Make sure the TAPE MONITOR button is set to OFF,
then press the source selector button corresponding
to the source to be recorded.
2. Play the source.
3. Operate the tape deck for recording.
Tape Monitoring
If the tape deck has separate record and playback
heads, during recording, the recorded sound can be
heard from the speakers with the TAPE MONITOR
button set to ON.
Recording
Tape Deck
3
– 14 –
MEMORY BACKUP
FUNCTION
BACK-UP Memory
This is the function which preserves the preset
memory and most-recent memory functions. In the
event of a power failure, or if the power cord of this
unit is disconnected from the electric outlet, the back-
up memory will preserve the preset memory and
most-recent memory functions for as long as
approximately 3 days.
To Prevent Erasing the Memory
If the power supply is interrupted for 3 days or longer,
the memory settings will be erased.
RESET SWITCH
1. When this system is subjected to an electrical shock.
2. When the power is irregular.
In these cases, try the following (in power standby
mode):
Rear panel
— —
Press the RESET switch lightly once or twice with a
pencil or a ballpoint pen.
Note: When the RESET switch is pressed, all the
memory will be canceled.
RESET SWITCH