Publicidad
8D
9.9D, 15D, 9.9F, 15F
8D, 9.9D, 15D
9.9F, 15F
2-10
EMU01080
STEERING FRICTION ADJUSTING
SCREW (for Tiller control model)
A friction device provides resistance to
steering movement. This is adjustable for
operator preference. An adjusting screw/bolt
is located on the swivel bracket.
EMU12960
408012
Adjustment
Resistance
Increased
Decreased
w
Do
not
screw/bolt. If there is too much resis-
tance, it may be difficult to steer, which
408011
could result in an accident.
EMU12970
TRIM ANGLE ADJUSTING ROD
The position of the trim angle adjusting rod
determines the minimum trim angle of the
outboard motor in relation to the transom.
001469
001742
Screw/Bolt
Turn clockwise
Turn counterclockwise
over
tighten
the
E
friction
Publicidad
