Publicidad
Idiomas disponibles
Idiomas disponibles
GB | IP Camera
Package contents:
Camera unit
Mounting material
User manual
Technical specifications:
Power supply: AC 100~240 V
Dimensions: 74 × 131 × 260 mm
Net weight: 800 g
Resolution: 1 920 × 1 080
Sensor: 1/2.9'' 2 Megapixel CMOS
IR range: Night vision up to 10 m
PIR detection range: 10 m
PIR angle: 120°
Lens: 3.2 mm, F2.0
Storage: SD card (max. 128 GB), Cloud storage, NVR
Lamp: 12 W
Luminous flux: Max. 200–1 200 lm (adjustable)
Colour temperature: 3 200 K
Enclosure rating: IP65
APP: EMOS GoSmart for Android and iOS
Connection: 2.4 GHz WIFI (IEEE802.11b/g/n)
Maximum number of users: 6
Description of the device: fig. 1
A – Motion sensor
B – Status LED:
LED glowing red: network not working.
LED flashing red: device waiting for connection to Wifi.
LED glowing blue: camera working correctly.
C – RESET button
Pressing and holding RESET for 5 s resets the device
to factory settings.
D – Speaker
E – Microphone
F – Lens
G – SD card slot (max. 128 GB)
Installation: fig. 2a/2b
2a
1. Loosen the screws of the clamps on the mounting
bracket and place the power cables.
2. Make sure the cables go through the opening in the
mounting bracket so that there is no risk of water ingress.
3. Tighten the screws.
4. Place the mounting bracket where you wish to mount it
and affix it using the enclosed screws.
2b
1. Install the camera unit onto the holder (mounting
bracket).
2. Mount the camera on with screws.
Installing the EMOS GoSmart app: fig. 3
The app is available for Android and iOS on Google play and
App Store.
Download the application by scanning the corresponding
QR code.
Router setting: fig. 4
The camera only supports 2.4 GHz Wifi (not 5 GHz).
EMOS GoSmart mobile app:
Fig. 5a
Open EMOS GoSmart and confirm the privacy policy by
tapping agree.
Fig. 5b
Choose sign up.
Fig. 5c
Enter a valid e-mail address and choose a password.
Confirm the privacy policy by tapping agree.
Choose log in.
Fig. 6a
Choose add device.
Fig. 6b
Choose the corresponding product category.
Fig. 6c
Choose the correct type of product.
Fig. 6d
Connect the device to power.
Fig. 6e
Make sure the LED on the device is flashing.
Confirm by tapping next.
Fig. 6f
Enter the name of the Wifi network and password.
Confirm by tapping next.
Fig. 6g
A QR code will appear on the screen of your device.
Place the QR code in front of the lens of the camera unit.
Confirm that you have heard an audio signal for successful
pairing.
Fig. 6h
The device will be detected automatically.
Fig. 6i
The device has been found.
Confirm by tapping done.
Connectivity: Wi-Fi 2.4 GHz IEEE 802.11b/g/n
Frequency band: 2.400–2.4835 GHz
Do not dispose with domestic waste. Use special
collection points for sorted waste. Contact local au-
thorities for information about collection points. If the
electronic devices would be disposed on landfill, dangerous
substances may reach groundwater and subsequently food
chain, where it could affect human health.
Hereby, EMOS spol. s r.o. declares that the radio equip-
ment type H4054, H4055 is in compliance with Directive
2014/53/EU. The full text of the EU declaration of con-
formity is available at the following internet address:
http://www.emos.eu/download.
CZ | IP Kamera
Obsah balení:
Kamerová jednotka
Instalační materiál
Uživatelský manuál
Technická specifikace:
Napájení: AC 100~240 V
Rozměry: 74 × 131 × 260 mm
Čistá hmotnost: 800 g
Rozlišení: 1 920 × 1 080
6
Publicidad
