All manuals and user guides at all-guides.com
• The refrigerator will have better performance at ambient of 20-25 degrees. We suggest the refrigerator be
powered off if the ambient temperature is lower than 10 degrees.
• After plugging the appliance, allow the unit to cool down for 2-3 hours before placing beverage into the
refrigerator compartment.
• Ventilation is very important for this kind thermoelectric refrigerator. The inside PCB will be broken easily
if the ventilation is bad; It will also reduce the life of the refrigerator.
• The refrigerator applies automatic defrosting system, so there is no need to defrost it manually.
Cleaning the appliance
Clean your new appliance regularly,
1.
Turn off the wine cooler first and then unplug the unit from the wall outlet.
2. Remove all contents.
3. Wash the inside with a damp warm cloth soaked in lukewarm water and baking soda solution.The solution
should be about 2 tablespoons of baking soda to a quart of water.
4. Be sure to keep the door gasket (seal) clean to keep the unit running efficiently.
5. The outside of the wine cooler should be cleaned with mild detergent and warm water.
6. Dry the interior and exterior with a soft cloth.
Dust or anything else blocking the vent may hinder the cooling efficiency of the appliance. Vacuum the vent
if necessary.
Vacation time
• Turn off the wine cooler first and then unplug the unit from the wall outlet.
• Remove all the contents.
• Clean the appliance.
• Leave the lid open slightly to avoid possible formation of condensation, mold, or odours.
Moving your appliance
• Turn off the wine cooler first and then unplug the unit from the wall outlet.
• Remove all the contents.
Operation
Maintenance and Care
14