Lavorwash GV Vesuvio Serie Manual De Instrucciones página 27

Machine visual inspection
In order to assure a correct functioning and prevent troubles, periodical visual inspections of the machine and its moving parts are recommended.
Such inspections must be carried out after de-energising the machine.
Particularly make sure that there are no anomalous contacts between the elements and that the fixing systems are not loosened.
Machine general cleaning
Once a week, remove all the dust from the machine using compressed air.
Clean the machine body externally with suitable detergents.
Always wear protective gloves when cleaning the machine.
Machine restart after a prolonged shutdown
Before restarting the machine after a prolonged shutdown:
- check the level of water and detergent; fill the tank, if necessary;
- let the machine idle for a while and make sure that it runs correctly.
Interventions to be carried out by the builder operators
Please find below a list of the maintenance operations to be performed with a precise technical skilland therefore by the builder qualified
operators.
The User must never carry out:
- any intervention on the electric system
- any intervention on the machine mechanic parts
- any replacement of the electric components
- For any adjustment, timing or replacement interventions that are not described in this handbook and that turn out to be necessary, please contact
the technical staff of the machine Reseller or Builder.
All manuals and user guides at all-guides.com
WARNINGS
WARNINGS
27