Publicidad
Idiomas disponibles
Idiomas disponibles
HOW IT WORKS
― ―
Your Pro Breeze Air Purifier removes up to
99.95% of dust, bacteria, and allergens from
the air. A 5-way purification system includes
3-layers of filtration, built-in Ultraviolet (UV)
LED sterilisation technology, and a negative
ion generator to help you to create an
invigoratingly clean living or working space.
•
3-Layer Filtration:
1.
Fine Preliminary Layer: for large
airborne particles, and to help protect
the lifespan of the HEPA filter.
True HEPA 13 Filter Layer: HEPA
2.
captures airborne particles as small as
0.3 microns such as dust, pollen, mould
spores and airborne mites.
3.
Micro Granular Activated Carbon
Layer: Removes pet odours, smoke
odours and harmful gases such as
formaldehyde and benzene. With 98%
Total Volatile Organic Compounds
(TVOCs) and 99% Formaldehyde
removable rate, the micro granular
activated carbon is evenly distributed
and will purify air 5-10 times more
thoroughly than traditional large granular
activated carbon filters.
•
Deep Ultraviolet (UV) LED Sterilisation
Technology: Our UV LED sterilisation
technology adopts wavelengths of
between 260 and 280nm of UV-C light.
This technology can be used for killing
99.9% of odour causing bacteria,
certain moulds and other allergens by
destroying DNA & RNA. This is non-
toxic, non-residual, and odourless, and
can effectively kill most bacteria in 1-40
seconds. Our UV light is installed inside
the air purifier to reduce exposure and
does not need replacing unlike more
traditional UV lights.
7 | English
Deep UV LED vs. Traditional UV mercury
lamp: UV LED is more than 1,000 times
more effective than a traditional UV-C
mercury lamp. Unlike the traditional
mercury lamp, UV LED does not contain
any toxic substances and is more
environmentally friendly.
•
Negative Ion Generator: Releases
negative ions into the air to eliminate
airborne bacteria and contaminants.
The negative ions bind to and neutralise
airborne pollutants for a cleaner
environment. The ultra-powerful Pro
Breeze negative ion generator generates
more than 2 million negative ion outputs.
DISPLAY AND INDICATORS
― ―
1.
Child Lock
2.
Ionizer
3.
UV LED
4.
Change Filter Indicator
5.
A ir Quality Light Indicator
6.
PM 2.5 Standard
PM2.5
― ―
1.
PM 2.5 Standard - PM 2.5 is a scale
for measuring the number of particles
smaller than 2.5 microns in the air (a
human hair measure 50-70 microns in
diameter). This is converted into an air
quality index whereby the lower the
number, the better the air quality.
Air Quality Light Indicator - The Air
2.
Quality Index will be displayed on the
screen. The appliance will also light up
based on the following scale:
•
Green (Excellent Air Quality) -
PM2.5 < 75 µg/m³
•
Yellow (Medium Air Quality) -
76 < PM2.5 < 150 µg/m³
•
Red (Bad Air Quality) -
PM2.5 > 151 µg/m³
CONTROLS
― ―
•
ON/OFF Button: Press ON/OFF button
once to turn the device on or off.
•
UV Button: UV mode will activate the
invisible UVC light. For more information
on how it works, please see the HOW
IT WORKS section above or visit
Probreeze.com
1.
The device will automatically start with
UV mode off.
2.
Press the UV button to turn the mode
on/off. The indicator light will illuminate
on/off.
•
Timer Button: Timer mode can be used
to turn the device off automatically (after
1, 2, 4, or 8 hours).
1.
When the device is on, press the timer
button until the desired time appears on
the screen.
2.
The device will automatically turn off
when the time is reached.
•
Speed Button: There are four speed
options: Sleep, Low, Mid and High.
When Sleep Mode is selected, the
device will continue to run, but all lights
will turn off.
English | 8
Publicidad
