Publicidad
Idiomas disponibles
Idiomas disponibles
1.
The device will start in low speed
mode -
2.
Press the SPEED button to manually
change the speed. The indicator light
will illuminate on your selected speed.
3.
To select Sleep Mode -
, press the
SPEED button until Sleep Mode is
illuminated. The device will continue to
work in sleep mode. All lights will turn off
apart from the sleep mode indicator light.
4.
To turn off sleep mode, press the SPEED
button again.
•
AUTO Button: When under auto mode,
the device will adjust the fan speed
automatically, according to the air
quality.
1.
Press the AUTO button once to turn on
auto mode.
2.
To turn off the auto mode, press the
speed button.
+
=
•
ON/OFF + Speed Button = Child Lock
Button
1.
Press and hold the ON/OFF and SPEED
buttons simultaneously for 5 seconds
to activate or deactivate the child lock
mode.
2.
When in child lock mode, all other
buttons will be disabled.
+
=
•
UV + Timer Button = Filter Reset
Button
1.
After 2,000 hours of use, the filter
indicator light flashes and the device will
9 | English
beep as a reminder to replace the filter.
2.
If the filter needs replacing, press
and hold the UV and TIMER buttons
simultaneously for 5 seconds after you
have replaced the filter to reset the
device.
Note: For your safety, the device will
automatically stop working and show "E1" on
the display, if the filter cover is opened.
+
=
•
Timer + ON/OFF Button = Negative
Ion Generator Button
1.
The device will start in with the negative
ion generator on.
2.
Press and hold the TIMER and ON/OFF
buttons simultaneously for 5 seconds to
turn the Negative Ion Generator on/off.
The indicator light will illuminate on/off.
REPLACING THE FILTER
INSTRUCTIONS
― ―
WARNING: ALWAYS TURN THE
APPLIANCE OFF AND UNPLUG THE
POWER CORD FROM THE
ELECTRICAL OUTLET BEFORE
HANDLING AND REPLACING THE
FILTER.
We recommended cleaning the filter with a
vacuum cleaner once a month and replacing
the filter every 6 to 12 months, or after 2,000
hours of use. After 2,000 hours of use, the
filter indicator light will flash and beep as a
reminder to replace the filter. You may need
to replace the filter earlier depending on the
environment of the room.
Note: this filter is for Pro Breeze PB-P07 Air
Purifier use only. For replacement filters visit
www.probreeze.com
To replace the filter:
1.
Shut down the appliance and turn the
power off. (Figure 1)
2.
Open the filter cover by lightly pulling
the handle.
3.
Remove the filter by pulling out the tab
at the top of the filter. We recommend
that you have a bag ready to prevent the
pollutants on the filter falling back into
the room (Figure 2).
4.
Insert the new filter and re-attach the
door cover.
5.
Press and hold the "UV" and "timer"
buttons simultaneously for 5 seconds
after you have replaced the filter.
Replacement Filter Model Number:
PB-P07F
Figure 1
Figure 2
CLEANING AND STORAGE
― ―
WARNING: ALWAYS TURN THE
APPLIANCE OFF, UNPLUG THE
POWER CORD FROM THE
ELECTRICAL OUTLET BEFORE
HANDLING OR CLEANING IT.
CAUTION: DO NOT ALLOW WATER
OR OTHER LIQUIDS TO RUN INTO
THE INTERIOR OF THE APPLIANCE,
AS THIS COULD CREATE A FIRE
AND/OR ELECTRICAL HAZARD.
CAUTION: DO NOT USE ANY
ABRASIVE CLEANERS OR SOLVENTS,
AS THIS CAN DAMAGE THE
APPLIANCE.
•
Clean the exterior surface of the
appliance by wiping it with a soft, damp
cloth. Dry the appliance with a soft,
clean cloth.
•
Clean the vents and openings of the
appliance regularly with a vacuum
cleaner, using the brush attachment to
avoid any dust build-up.
•
To extend the lifespan of the filter,
a vacuum cleaner, using the brush
attachment can be used to remove dust
from the surface of the filter.
•
Store the appliance in a safe, clean and
dry place, out of reach of children when
not in use.
•
Do not attempt to clean the appliance in
any other way than that detailed by the
manufacturer.
•
To store your product, we recommend
using the original or a similar-sized box.
RECYCLING AND DISPOSAL
― ―
Waste electrical and electronic products
(WEEE), batteries, accumulators and
packaging should not be disposed of with
general household waste. This is to prevent
English | 10
Publicidad
