Publicidad
Cleaning and Care
• To guarantee the proper cooling of the motor, always
keep the air vents clean and free of obstructions.
• Regularly inspect all the mounting nuts and double check
the screws are tight. If a screw is loose, tighten
immediately.
Service
• Service to the tools shall only be carried out in a
Authorized Service Center. Service
and maintenance performed by non-qualified people may
be dangerous and can lead to personal injuries. It also
makes the product Warranty void.
8
ENGLISH
Maintenance
Lubrication
• The tool is adequately oiled in the factory. It does not
require additional lubrication.
Bring or send the tool to a
center in two to six months, depending on the level of use,
for a thorough cleaning and inspection. This lubrication
should only be done by service technicians trained in the
repair of power tools, such as those found in
service centers.
Tools frequently used in production, heavy tasks, or
exposed to heat may require more frequent lubrication.
Tools not used for long periods of time should be
re-lubricated before use.
Carbon Brushes Replacement
• Carbon brushes shall be checked periodically and
replaced in a
Center.
• When replaced, ask the technician to inspect if the new
carbon brushes move freely in the carbon brush housing.
Ask them to run the tool five minutes to match contact of
the carbon brushes and the commuter.
• Use only
carbon brushes, designed specifically with the right
strength and electric resistance for each type of motor.
Carbon brushes with different specifications may damage
the motor.
• When replacing carbon brushes, always change both.
service
Authorized Service
original replacement
Publicidad
