Publicidad
Idiomas disponibles
Idiomas disponibles
Use protection against dust.
Direction of rotation of the saw blade.
Be careful with hot surfaces: danger of burns.
Do not touch hot parts of the engine.
Do not dispose of electrical devices in the household waste.
In accordance with European regulations, used electrical appliances must
be collected separately and recycled in an environmentally friendly manner.
1.2. General safety warnings
Before starting to work with the machine, carefully read the safety and operating instructions.
If another person is going to handle the product, provide them with the operating instructions.
It should only be used by those persons familiar with the instructions. Keep the operating
instructions for future reference.
Packaging: The product has been packed to prevent damage during transport. The packaging
can be reused or recycled.
Carefully read and follow the instructions below. Use them to learn about your product, proper
use, and safety recommendations. Keep the instructions in a safe place for future reference.
Caveat
-
protection systems
It is forbidden to remove, dismantle or alter the security systems, as well as the
installation of non-original parts. Before carrying out any maintenance or replacement
task that involves disassembling parts, unplug the machine.
-
To ensure the disconnection of the machine, it is not enough to turn off the motor, it will
have to be unplugged from the electrical current.
Once maintenance tasks have been completed, refit the safety systems before
reconnecting the machine to the mains.
-
operators
Using the circular saw carries a risk. For this reason, its use is only allowed by people
familiar with it. Its use is not allowed by persons under 16 years of age. Wear tight fitting
clothing, safety glasses and hearing protection when using the machine.
-
Machine positioning
The work area should be flat and firm with enough space around it, as it is inevitable
that the machine will move with use. For the same reason, you must keep the work
area and the paths for collecting and carrying firewood clean and free of obstacles. Any
point that could cause slipping must be treated (for example, with sawdust). You should
clean the area of sawdust and chips regularly.
-
The product may cause occasional voltage fluctuations under non-optimal conditions.
-
The user is responsible for ensuring that the plug point complies with the
aforementioned conditions.
-
Persons unable to use the machine due to physical, sensory or mental impairment,
inexperience or lack of knowledge, must not use this machine.
5
EN
Publicidad
