Anova CL500 Manual De Usuario página 90

3. PRODUCT DESCRIPTION
The circular saw is only designed to cut firewood of the dimensions described. The
manufacturer is not responsible for damages or injuries caused by improper use of the machine
or failure to comply with the safety instructions.
Using the machine for purposes other than the one for which it was designed may cause
damage to the machine or injury to the user.
The steel structure has been treated with a protective powder coat. The bottom of the saw
cradle adjusts automatically by exerting pressure on the spring placed behind it.
Other features:
Combined socket and switch.
−
Saw brake in accordance with European standards.
−
− 500mm carbide saw.
− Cradle (trunk support) extendable and adjustable.
rubber wheels.
−
Suitable replacement circular saw: 500x30mm.
−
4. OPERATING AND ASSEMBLY INSTRUCTIONS
4.1. Before assembly
Fig. 2, 3: Install the switch and connector in the bracket with 2 screws and nuts
Fig. 4, 5, 6: Mount the saw.
1. Electrical connection
2. Transport wheels
3. Cradle spring/trunk support
4. Engine
5. ON/OFF switch (emergency switch)
6. Trunk/cradle support extension
7. Handle / handle
8. Protective cover of the saw
10
EN