Publicidad
Idiomas disponibles
Idiomas disponibles
Make sure there are no foreign objects in the machine that could be thrown when
−
starting it.
−
Always position yourself out of the path of objects that could be thrown (wood chips or
pieces and/or bark).
It is forbidden to use the machine if you are under the influence of substances that
−
affect your ability to use and react.
Do not use the machine to carry out tasks other than those for which it has been
−
designed, indicated in the "Work instructions" section.
−
Always follow our instructions for safety and accident prevention, use of the machine,
operation, work, care and maintenance. Deviations from the instructions may only be
made with the written permission of the manufacturer.
−
Never leave the machine without first unplugging it. Make sure that it cannot be reached
by unauthorized persons.
The connection to the electrical network must have a differential switch.
−
Use the shortest possible power cable, or the largest possible cable section. Long and
−
thin cables cause the motor to overheat and the damage caused could be irreparable.
Caution:
With cables of 20m or more, its section must be between 1.5mm2 and 2.5mm2.
Never start the engine when the machine brake is on. Wait at least 1 minute between cutting
one piece and the next.
The saw should not be used unless the break function of the switch is guaranteed. Before
starting any work, check the downtime of the saw by turning the saw on and off. The stopping
time should be approximately 10 - 15 seconds. If the period is longer, do not use the saw and
contact an authorized service provider.
4.4. machine handling
Place the firewood in the cradle (log support) as
−
securely as possible (without wobbling) (Fig. 7).
−
Beware of foreign and splintery items in the place.
You can turn on the machine by pressing the green
−
button of the ON/OFF switch. You can turn it off by
pressing the red button on the same switch. In an
emergency, turn off the machine with the red
emergency button.
−
Grasp the cradle handle with both hands, hold it with
your thigh, and push it slowly and evenly onto the
saw blade.
Caveat
The machine must be mechanically locked in such a way
that the cutting stroke of the pivoting log carriage is only
operational when the upper guard is in the guard (closed)
position and locked during the cut and to open only in the
rest position.
12
EN
Publicidad
