Publicidad
Idiomas disponibles
Idiomas disponibles
6. INSTALLATION:
The device can be wall mounted, and it has natural convection cooling. Its installation position is as shown in
the following figure. It is important not to cover the ventilation slots, so that air can circulate freely.
Figure 13. View of typical EPS-120-5192 and EPS-200-5193 mounting position
The weight of the chargers, including connectors, is less than 1.4kg.
For installation, it is recommended to use 4 M4 or M5 screws with standard flat washers, with a maximum
tightening torque of 1Nm.
www.premiumpsu.com
Powering Your Challenge
Serie EPS
Manual de Operación
MA-5192A-1
20-10-2021
18 / 84
Publicidad
