Publicidad
Idiomas disponibles
Idiomas disponibles
CEILING FAN WITH LIGHT
1. SAFETY INSTRUCTIONS
WARNING
Read booklet and safeguards carefully before beginning installation and save these instructions. To redu-
ce the risk of fire, electric shock or personal injury, attach the fan directly to the support structure of the
building according to these instructions, and use only the hardware supplied.
SAFETY INFORMATION
1. To avoid possible electrical shock, before installing your fan, disconnect the power.
2. All wiring must be in accordance with national and local electric codes. If you are unfamiliar with
wiring, you should use a qualified electrician.
3. To reduce the risk of personal injury, do not bend the blade attachment the system when installing,
balancing or cleaning the fan. Never insert foreign objects between rotating fan blades.
4. To reduce the risk of fire, electrical shock or motor damage, do not lift or carry the fan by the lead
wires.
5. The fan blades cannot be installed lower than 2.3 metres from the floor.
6. The place where the fan is installed, should allow the blades to rotate without any obstructions.
7. Do not lay fan on its side to avoid damaging iT.
TOOLS REQUIRED
-
Screwdriver
-
Wire cutters
-
Pliers
-
Step ladder
Use a metal outlet box suitable for the fan support. Before attaching the fan to the outlet box, make sure
it is securely fastened by at least two points to a part of the structural ceiling.
10
EN
Publicidad
