Publicidad
Idiomas disponibles
Idiomas disponibles
5. Pull bag out of the bag mount and dispose of dust bag.
NOTE:
FILTER CHANGING, page 29).
NOTE:
closing until a new bag is installed.
REPLACING DUST BAG
Note: DO NOT bend or crease the middle of the cardboard when installing the bag into the
bag mount slots.
1. Verify that vacuum cleaner is unplugged.
2. Rotate bag mount down and install bag into slots per illustration, pushing down until the
cardboard tab locks into position and the holes align.
3. Tuck the bag securely into the bag cavity so that none of the bag is able to be pinched
by the hood.
4. Close and latch canister hood.
5. Insert hose into canister until it snaps in place. ASSEMBLY INSTRUCTIONS, page 9-12).
CAUTION
NEVER EMPTY OUT AND REUSE A DUST BAG.
carpet lint, etc. can clog the bag and cause it to burst before it is full and may cause
damage to vacuum cleaner motor. Change bag more often when vacuuming these
materials.
-28-
Publicidad
