Publicidad
Idiomas disponibles
Idiomas disponibles
ENTER - button to confirm the entered data/settings.
ZERO - reset function.
↑ - button for entering numerical data.
UNIT - button for changing the weighing units.
SET - selecting upper and lower limits in weighing mode. Balance sampling in
counting and percentage mode.
CALI . - scalecalibration button.
MODE - mode selection button: weighing, counting, percentage counting.
3.2.
Preparation for operation
POSITIONING OF THE UNIT
The ambient temperature must not exceed 40°C and ambient humidity should not
exceed 85%. Place the unit in a way that ensures good air circulation. Maintain a
minimum clearance of 10 cm from any wall of the unit. Keep the unit away from any
hot surfaces. Always operate the unit on a level, stable, clean, fireproof, and dry
surface and out of the reach of children and persons with impaired mental, sensory,
and intellectual functions. Place the unit in such a way that the main plug can be
reached at any time. Ensure that the power supply to the unit corresponds to that
specified on the identification plate!
Assembly on the example of the SBS-PF-600 / 100N model - other models are
mounted in the same way, taking into account differences such as wheels/feet, etc.
Remove the mounting hardware and the main frame of the unit from the packaging:
Publicidad
