Publicidad
Step 11
Step
Fasten the remaining LOWER FRAME (L) and WASHERS (10) to
å
the RIGHT END (C) and RIGHT LEG (H). Tighten two 1-3/16" HEX
HEAD SCREWS (12) and two 1-3/8" HEX HEAD SCREW (17) as
shown using the L-WRENCH (11).
NOTE: You should start each SCREW a few turns before completely
å
tightening any of them.
1-3/8" HEX HEAD SCREW
(2 used in this step)
L
H
12
1-3/16" HEX HEAD SCREW
(2 used in this step)
17
11
C
10
Page 17
Publicidad
