Anker Y1010 Manual Del Usuario página 6

5. Connect the charging dock to the power supply by using the provided USB-C
charging cable and charger.
>>> The power LED indicators will turn on.
UK
EU
US
• If you use a charger with an output of 5~15W, the charging
dock will give priority to charge the headset. If the output of the
charger is less than 5W, the charging dock won't work.
• Normally, the voltage of Ni-MH batteries will drop after being
fully charged. After the controllers are fully charged and left
on the charging dock for more than 6 hours, the battery level
displayed on your Quest 2 or in the App will be less than 100%,
but will still have enough power to last for more than 10 hours.
07 EN
USB-C
LED Light Guide
Solid amber for 5 seconds
Solid amber
Solid green
Flashing amber
Specifications
USB-C Input
Magnetic USB-C Output Max
Left Controller Charging Port
Right Controller Charging Port
Charging Time
Rechargeable Battery Capacity
FAQ
Q1. Why do the controllers feel warm when charging?
Unlike Li-ion batteries, it's normal for Ni-MH rechargeable batteries to heat up when
charging. This temperature increase is nothing to worry about as there is a built-in
temperature protection feature to prevent overheating.
Q2. What should I do if temperature protection is triggered?
The built-in temperature protection automatically stops charging when the battery
temperature rises above the trigger point. When charging is stopped, remove the
controllers from the charging dock and let them cool down for 5-10 minutes. You do
not need to remove the batteries. After the controllers have cooled down, put them
back onto the charging dock to resume charging.
Connected to power
Being charged
Fully charged
Working improperly
DC 5V/9V
5.0VDC 3.0A, 9.0VDC 2.0A
1.5VDC 0.9A
1.5VDC 0.9A
Appr. 2.5 hours
DC1.2V / 1800mAh x2
EN 08