Descargar Imprimir esta página

Craftsman 98020 Manual Del Operador página 3

Ocultar thumbs Ver también para 98020:

Publicidad

Idiomas disponibles

Idiomas disponibles

• DaMage tO unit – If you strike or become entangled with a foreign object, stop tool
immediately, remove battery, check for damage and have any damage repaired before further
operation is attempted. Do not operate with a broken hub or spool.
• reMOVe battery – when not in use, when replacing line, or prior to cleaning.
• aVOiD DangerOuS enVirOnMental cOnDitiOnS – Do
not use electric tools in damp or wet locations. Follow all instructions in this instruction Manual for
proper operation of your tool. Don't use the tool in the rain.
• DO nOt Operate portable electric tools in gaseous or explosive atmospheres. Motors in these
tools normally spark, and the sparks might ignite fumes.
• StOre iDle tOOlS inDOOrS – When not in use, tools should be stored indoors in a dry,
locked-up place out of reach of children.
• Stay alert – Do not operate this unit when you are tired, ill, or under the influence of alcohol,
drugs, or medication.
• Maintain applianceS With care – Follow instructions in maintenance section. keep
handles dry, clean and free from oil and grease.
• checK DaMageD partS – before further use of the appliance, a guard or other part that
is damaged should be carefully checked to determine that it will operate properly and perform
its intended function. Check for alignment of moving parts, binding of moving parts, breakage
of parts, mounting, and any other condition that may affect its operation. a guard or other part
that is damaged should be properly repaired or replaced by an authorized service center unless
otherwise indicated elsewhere in this manual.
• DO NOT immerse tool in water or squirt it with a hose. DO NOT allow any liquid to get inside it.
• DO NOT store the tool on or adjacent to fertilizers or chemicals.
• DO NOT clean with a pressure washer.
• keep guards in place and in working order.
• keep hands and feet away from cutting area.
Warning:
can not be controlled with the switch trigger is dangerous and must be repaired.
Warning:
california to cauSe cancer, birth defectS or other reproductive harm. Some exampleS of theSe
chemicalS are:
• compounds in fertilizers
• compounds in insecticides, herbicides and pesticides
• arsenic and chromium from chemically treated lumber
To reduce your exposure to these chemicals, wear approved safety equipment such as dust masks
that are specially designed to filter out microscopic particles.
SyMbOlS
The label on your tool may include the following symbols. The symbols and their definitions are as follows:
V .................. volts
Hz ................ hertz
min .............. minutes
or DC ... direct current
................ Class I Construction
(grounded)
................ Class II Construction
(double insulated)
............ Read instruction manual before use
................ Use proper eye protection
Do not use tool if the switch trigger does not turn the tool on or off. any tool that
Some duSt created by thiS product containS chemicalS known to the State of
SaVe theSe inStructiOnS.
A ...................amperes
W ..................watts
or AC .......alternating current
n o..................no load speed
..................earthing terminal
................safety alert symbol
.../min or rpm...revolutions or
reciprocation per minute
..................Use proper respiratory protection
..................Use proper hearing protection
3

Publicidad

loading