Makita DUH506 Manual De Instrucciones página 9

2. Place the tool upside down, then remove 6 bolts,
and then remove the cover and the plate.
1
2
3
Fig.6
► 1 . Bolt 2. Cover 3. Plate
NOTE: The plate may remain on the cover.
3.
Turn the crank with the slotted screwdriver so that
2 holes are perpendicular to the shear blades.
1
Fig.7
► 1 . Crank 2. Hole
4. Remove 2 bolts, the felt pad and the sleeves, and
then remove the shear blades.
1
Fig.8
► 1 . Felt pad 2. Bolt 3. Sleeve 4. Shear blades
5. Remove the blade cover, and then attach it to the
new shear blades.
Fig.9
► 1 . Blade cover
6.
Align the rear edges of the shear blades as shown
in the figure.
2
Fig.10
► 1 . Rear edge
9 ENGLISH
2
3
4
1
1