en-us_main.book.book Page 29 Wednesday, December 7, 2022 8:18 AM
Error
Possible Cause & Solution
Code
Temp
Temperature sensor failure.
sensor
• Turn off the appliance and call for
error
service.
Humidity
Humidity sensor failure.
sensor
• Turn off the appliance and call for
error
service.
High
Electric dryer power cord is not
voltage
connected correctly, or house
Low
power supply is incorrect.
voltage
• Reset circuit breaker or replace
Power
fuse. Do not increase the fuse
supply /
capacity.
Power
issue
House fuse is blown, circuit breaker
has tripped, or power outage has
occurred.
• If the problem is a circuit
overload, have it corrected by a
qualified electrician.
Gas
Gas supply or service turned off.
supply
(Gas model only.)
• Confirm that house gas shutoff
and the dryer gas shutoff are both
fully open.
Restricted or Blocked Airflow
Avoid long runs or runs with multiple elbows or
bends.
Excess or crushed
transition duct
Too many elbows or
exhaust too long
Check for blockages and lint buildup.
Make sure the ductwork is not crushed or
restricted.
INSTALLATION
29