LG DLX670 Serie Manual Del Propietário página 43

en-us_main.book.book Page 43 Wednesday, December 7, 2022 8:18 AM
NOTE
• The Energy Saver option is turned on by default
in the Normal cycle.
• Turning the Energy Saver option off changes
the default cycle to the last cycle used. To return
to the default settings, turn the Energy Saver
option on.
Wrinkle Care
Selecting this option will tumble the load
periodically for up to 3 hours after the selected
cycle, or until the door is opened. This is helpful in
preventing wrinkles when you are unable to
remove items from the dryer immediately.
Press the Wrinkle Care button before you start a
dry cycle.
NOTE
• When the option is turned on, only the Power
button works after the dry cycle ends.
• To select the option after starting a cycle, pause
the cycle, set the option, and press Start/Pause.
• Always turn off the appliance before unloading
the clothes.
Drum Light
The drum is equipped with a white LED light that
illuminates when the dryer is turned on. This light
automatically turns off when the door is closed
and the cycle starts.
• Press the Options button, turn the knob to
select Drum Light and press the
Select On and press the
• The drum light will turn off automatically after 4
minutes.
Damp Dry Signal
When this option is selected, the appliance signals
when the load is approximately 80% dry. This
allows you to remove faster-drying lightweight
items or items that you would like to iron or hang
while they are still slightly damp.
Press the Options button, turn the knob to select
Damp Dry Signal and press the
Select On and press the
8
8 (OK) button.
(OK) button.
8
(OK) button.
8
(OK) button.
Control Lock
Use this function to disable the controls. This
function can prevent children from changing
cycles or operating the dryer.
NOTE
• The function does not lock the door.
• Once this function is set, all buttons are locked
except the Power button.
• When the controls are locked, the Control Lock
indicator lights up and the dry cycle is shown on
the display.
• Turning off the power will not reset this function.
You must deactivate this function before you can
access any other options and functions.
• To activate/deactivate the function, turn the
dryer on, press the Options button, turn the
knob to select Control Lock, and press the
(OK) button. Select Off and press the
8
button.
Cycle List Edit
Edit the list of dry cycles as desired.
1
Press the Options button.
2
Turn the knob to select Cycle List Edit, and
press the (OK) button.
8
3
Select a dry cycle and press the
NOTE
• The Normal cycle cannot be deleted.
• The order of cycles in the list can be changed. On
the product, use the Auto Cycle Optimization
function in the Additional Settings menu. In the
LG ThinQ application, use the Product Cycle
Management feature.
Additional Settings
1
Press the Options button.
2
Turn the knob to select Additional Settings
and press the 8 (OK) button.
3
Turn the knob to select the desired setting
and press the (OK) button.
8
OPERATION 43
(OK)
8
(OK) button.
8