6. Using 2 or more people, place the oven in its upright position.
7. Go to the "Make Electrical Connection" section.
Double Ovens
The positioning of the oven feet allow a double oven to be
installed in a cutout height between 48
and 132.6 cm). Refer to the following instructions to position the
feet for the size of your cabinet cutout.
Cutout Height is Between 48
128.1 cm)
The oven feet do not need to be installed. The oven is configured
correctly as received.
NOTE: Do not remove the spacers.
Go to the "Make Electrical Connection" section.
/
" and 52
/
" (124.1 cm
7
3
8
16
/
" and 50
/
" (124.1 cm and
7
7
8
16
A. Spacers
Cutout Height is Between 50
129.9 cm) or for Flush Installation
1. Using 2 or more people, place the oven on its back on a
covered surface.
2. Install a rear foot on the left rear spacer using a #8-18 x 3/8"
(9.5 mm) screw.
NOTE: Position the foot so the long side of the foot is facing
toward the top of the oven.
A. Spacer
B. Rear foot
C. #8-18 x 3/8" (9.5 mm) screw
3. In the same manner, install a rear foot on the right rear of the
oven.
/
" and 51
/
" (128.2 cm and
1
1
2
8
15