INSTALLATION
3. While pushing booster against vehicle seat, pull
one adjuster strap tight and then the other. Make
sure that both
attached to the vehicle's lower anchors.
4. The entire seat bottom should sit flat on the
vehicle seat.
3
NOTE:
Even with LATCH/UAS connectors properly
attached and adjusted, child seat will still have
movement against the vehicle seat back and bottom.
IMPORTANT: DO NOT
interferes with vehicle seat belt.
IMPORTANT:
seating position, make sure it is stable and does not
rock from side-to-side, otherwise choose a different
seating position.
18
LATCH/UAS
use LATCH/UAS if installation
When using booster seat in center
Solana® 2 LATCH™
connectors are securely
4