Publicidad
Idiomas disponibles
Idiomas disponibles
Table 5. Display Indicators
Indicator
MAX
MIN
H
DC AC
trms
Auto Range
Manual Range
61000mV
-
>
MEM
MR
FULL
CLR
2500V
1000V
Description
Indicates maximum reading has been selected.
Indicates minimum reading has been selected.
Indicates display hold is active
Diode test function is selected
AC/DC Voltage or Current measurement
True RMS measurement
Continuity test function is selected
Low battery. Indicates when it is time to replace
the battery.
To avoid false readings, which could lead
to possible electric shock or personal injury,
replace the battery as soon as the low battery
indicator appears
High voltage warning
Auto ranging mode
Manual ranging mode
Display range in use
Negative symbol
Greater than symbol
Primary display
Data store symbol
Data recall symbol
The number of stored data
When the number of stored data reaches 99,
the display will show FULL.
When the number of stored data is full, press
CLR to clear up the stored data before storing
another set of data.
Clear up the stored data
Indicates a test lock will be applied the next time
you press TEST on the Meter. The test lock acts
to hold down the button until you press HOLD or
TEST again.
Source voltage rating for insulation test.
50V, 100V, 250V, 500V and 1000V ranges
available.
Secondary Display
Measurement units
Warning
29
Publicidad
