Publicidad
Idiomas disponibles
Idiomas disponibles
MEASURING RESISTANCE (see figure 8)
Warning
To avoid electric shock, injury, or damage to the Meter, disconnect circuit power and
discharge all high-voltage capacitors before testing resistance.
The Resistance ranges are 600.0Ω, 6.000kΩ, 60.00kΩ, 600.0kΩ, 6.000MΩ and 40.00MΩ
To measure resistance, connect the Meter as follows:
1. Insert the red test lead into the
2. Set the rotary switch to
select Ω measurement mode
3. Connect the test leads across with the object being measured. The measured value shows on
the display.
Note:
• When Resistance measurement has been completed, disconnect the connection between
the testing leads and the circuit under test, and remove the testing leads away from the input
terminals of the Meter.
MEASURING RESISTANCE AND CAPACITANCE
Figure 8. Measuring Resistance
terminal and the black test lead into the COM terminal.
Resistance measurement is default or press SELECT button to
33
Publicidad
