Publicidad
Idiomas disponibles
Idiomas disponibles
POWER SUPPLY AND ELECTRICAL CONNECTIONS
• In accordance with the rules in force, the power of the heating
appliance must be protected by an RCD of 30 mA and an over-
current protection device, suitable to the characteristics of the
connection line.
• Before using the appliance the first time, check that the voltage
used corresponds to that specified on the appliance.
• This heating appliance is a class II appliance (double electrical
insulation).
• Earth connection is prohibited.
• Connection of the three wires must take place in an electri-
cal junction box compliant with current regulations.
• The pilot wire must be disconnected if not in use.
Single-phase power supply 230 V~ ±10% 50 Hz.
• Blue/gray wire: Neutral
• Brown wire: Live
• Black wire: Pilot Wire
[ 29 - EN ]
Publicidad
