Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION SETTINGS MENU
The thermostat has a settings menu. To access the menu, hold the
The first page of the menu will be displayed:
Now select a setting to be edited, using the key . Once the required setting has been selected,
push
to access the relevant editing phase (value flashing) and edit the value using the keys
or . Push the
key again to confirm the setting. To exit the settings menu, select "End" and
push the
key.
N.
Predefined values and other possibilities
01
°C/°F
°C
°F
02
__:__
24H
12H
03
dst
YES
no
AF
04
This menu can be used to set the temperature for the "anti-freeze" mode.
The default value for this setting is 5.0°C.
Edit the value using the
05
__._
Displaying of the value measured by the thermostat, with a deviation value.
To edit the value reads, push the
value.
Push the
Clr
07
This can be used to reinstate the default settings for the thermostat (time,
programs, etc.)
Confirm by holding down the
08
Software version
Vers __._
09
END
Push the
Type of degrees displayed
degrees Celsius
degrees Fahrenheit
Time format
(24:00)
(12:00 AM (morning) / PM (afternoon)
Automatic time change (summer <--> winter)
The time changes automatically.
The time must be edited manually.
Anti-freeze temperature
or
Calibration of the built-in sensor
key again to display the deviation added to the temperature value.
Default setting
Exit user menu
key to exit the menu and go back to the main screen.
[ 42 - EN ]
keys and confirm using
or
keys, and then the
key for 10 seconds.
key down for 5 seconds.
.
key to save the
Publicidad
