Publicidad
Idiomas disponibles
Idiomas disponibles
Pilot wire function
If a pilot wire signal is received, the thermostat will only process it if the order is lesser (see the
"Managing errors" paragraph). The pilot wire signal is indicated by:
• A flashing pictogram above the "home" logo.
• Displaying the "FP" indicator in the top right corner of the LCD display.
Orders sent:
The thermostat uses the comfort temperature setting - 3,5°C.
The thermostat is switched off.
WARNING - In this mode, the installation is exposed to the risk of
freezing.
The thermostat uses the anti-freeze temperature setting (editable in user
menu n° 5, see the "Installation setting menu" paragraph).
The thermostat uses the comfort temperature setting - 1°C.
The thermostat uses the comfort temperature setting - 2°C.
Anti-freeze mode
This mode protects the installation against freezing. To set the anti-freeze temperature, use pa-
rameter N° 05 'AF' in the menu. For information, see the "Installation Settings menu" paragraph
(default value: 5°C).
Timer mode
The "Timer" or "Boost" mode can be used to set a temperature for a precise time period. The
mode configuration phases are:
• Setting the duration using the
firm using
(settable from 1 hour to 44 days).
• Setting the required temperature, using the
setting: 21°C).
When this mode is active, the Timer logo
until the end of the period set.
Before the "Timer" mode is applied, the product goes back to the selected mode automatically.
keys, in hours "H" up to 24H and in days "d" and con-
or
or
keys, and then confirming using
flashes and the number of hours / days diminishes
[ 37 - EN ]
(default
Publicidad
