STORZ & BICKEL Crafty+ Modo De Empleo página 58

The Storz & Bickel App is not neces-
sary for operating the Vaporizer, does
however allow individual settings to be
made and allows the readout of additi-
onal information when the Vaporizer is
in operation.
As the Vaporizer has too little space for
a display, the Vaporizer can be connec-
ted to a smartphone via Bluetooth®
and the smartphone's display used.
The availability of the Storz & Bickel
App depends on the operating system.
Zw.f1vá Uwáá3'pé
Basic temperature: 180°C (356°F)
Booster temperature: +15°C (27°F)
(in relation to the basic temperature),
corresponds to: 195°C (383°F)
Superbooster temperature:
+15°C (27°F)
(in relation to the basic temperature),
corresponds to: 210°C (410°F)
LED indicator brightness
CRAFTY + :
Charge indicator lamp CRAFTY + : ON
Vibration CRAFTY + :
Vibration smartphone:
Smartphone alarm tone:
RP''wsá3'p ágw i f7P,39w,
®&K. g bägEK•.LUB
K Download the Storz & Bickel App.
8 S T O R Z & B I C K E L A P P
100%
ON
OFF
OFF
á Make sure that the Bluetooth®
function is switched on and that
it is not occupied by another
Bluetooth® device.
á Switch on the Vaporizer.
á Start the Storz & Bickel App.
á Enter the serial number (=six-digit
alphanumeric string on the type
plate at the bottom of the device
f'l 7,w¼ 2 Rd P, RV P. óP1, if
porizer.
When the Storz & Bickel App is
i
subsequently started up, the two
devices connect automatically.
If another CRAFTY + Vaporizer is to
i
be controlled by the same smart-
phone, disconnect the previous
connection using the „Disconnect"
button and enter the serial number
of the other CRAFTY + Vaporizer.
8.3 1BU! zKBä8L0 K .B
bKLE) t &5HBy i ••
CBä•BEgK!EB
This function allows you to read the set
and actual temperatures and change
your temperature settings. You will
fvéP ¼ ' l ágw sgf,pw 3'l3sfáP, P. ágw
Vaporizer.
Device
Device-related information such as op-
erating hours, software versions etc.
can be viewed here.
58
-