Descargar Imprimir esta página

MicroPower CHAMP 2A1A3 Serie Manual Del Usuario página 6

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 51
NOTE: General information not connected to safety for person or the product.
Graphical symbols
The following graphical attention symbols may appear on the products and in the documentation.
Read the instructions. The manual contains important safety and oper- ating instructions
Stop operation. Always stop the charging process by disconnecting the mains before disconnecting the battery
WARNING, risk of electric shock. High voltage inside. High output voltage. Do not touch uninsulated battery terminals,
connectors or other live electrical parts
CAUTION, undesirable conse- quences. The situation needs operator awareness or action
2.
Introduction
This document contains use and maintenance instructions for the intended battery charger. This document is of relevance
for the one who uses the battery charger for its purpose; charge batteries. It includes connecting the charger to the batte-
ry, handling the charging process, and managing basic settings.
Target groups:
• Installers
• Operators
• Maintenance personnel and technicians
3.
Description
Champ is a compact and waterproof battery charger for charging lithium-ion (Li-ion) and lithium iron phosphate (LiFePO4)
batteries. The battery charger is delivered preprogrammed. The charger can also be delivered with power supply sof-
tware, giving a steady output of preset voltage level.
The built-in microprocessor controls current and voltage during the charging process. The charger's LEDs indicate the
status of the charging process. The charging time and temperature of the charger are monitored throughout the charging
process. The charging is limited in the event of defect cells or insufficient cooling etc.
4.
Receiving
NOTE: Installation may only be performed by qualified service partner.
MECHANICAL INSTALLATION
battery charger:
• is intended for installation in vehicles and other applications
• is suitable for indoor and outdoor use
• is required to be mounted against a solid surface
• should, when fitted on a wall or in a vehicle, be vertically mounted for optimal cooling
5
The
6

Publicidad

loading