Publicidad
Idiomas disponibles
Idiomas disponibles
• Turn the ignition switch to the "OFF" position - the engine will stop.
• In case of further non-use, close the fuel valve by moving its lever to the
"OFF"
IMPORTANT: in case of emergency shutdown of the pump: turn the ignition
switch to the "OFF" position - the engine will stop. Close the fuel valve.
3.3.4
TRANSPORT AND STORAGE
If the equipment is not to be used again, cool it down completely before
transporting.
Flush the pump with clean water, then drain any remaining water by
unscrewing
Close the fuel valve (I). For transport, it is advisable to empty the fuel tank
to
prevent
Transport the unit in a horizontal position - as set during operation.
If the unit is not used for an extended period of time, cool down:
• Cool the unit.
Flush the pump with clean water and pour off any remaining
•
water by unscrewing the water drain plug (N).
• Turn off fuel valve (to "OFF" position).
• Empty any residual fuel from the fuel drop tank in the carburetor by
unscrewing the screw on the bottom of the carburetor (see image
below).
the
water
any
fuel
drain
leakage
during
position.
plug
(N).
transport.
Publicidad
