Publicidad
Idiomas disponibles
Idiomas disponibles
b)
Do not use the unit if the ON/OFF switch does not function properly (does not
turn on and off). Units that cannot be controlled by the switch are unsafe,
cannot operate, and must be repaired.
c)
Unplug the unit before making adjustments, changing accessories, or putting
it away. This precaution reduces the risk of accidental start-up.
d)
Keep unused equipment out of the reach of children and out of the reach of
anyone unfamiliar with the unit or this instruction manual. These units is
dangerous in the hands of inexperienced users.
e)
Keep the unit in good working condition. Check before each use for general
damage or damage to moving parts (cracks in parts and components or any
other condition that may affect the safe operation of the unit). If damaged,
have the unit repaired before use.
f)
Keep the unit out of the reach of children.
g)
Repairs and maintenance should be carried out by qualified personnel using
only original spare parts. This will ensure the safety of use.
h)
To ensure the designed operational integrity of the unit, do not remove
factory-installed covers or loosen screws.
i)
Do not touch any moving parts or accessories unless the unit is unplugged.
j)
Do not leave the unit switched on unattended.
k)
Clean the unit regularly to prevent permanent dirt build-up.
l)
The unit is not a toy. Cleaning and maintenance must not be performed by
children without adult supervision.
m) Do not tamper with the unit to alter its performance or design.
n)
Keep the unit away from sources of fire and heat.
o)
Do not overload the unit.
p)
Do not block the ventilation openings of the unit!
q)
Use only original cutting blades. Do not use damaged cutting blades with dull,
missing or broken teeth. Work only with sharp blades, honed in a specialized
workshop.
r)
When changing blades or cleaning the clippers, always make sure that the
clipper is switched off and disconnected from the mains!
s)
The noise generated by the machine can be loud and frighten the animal. Being
kicked by the animal or crushed by its body weight can cause serious injury.
Make sure the animal is securely tethered and always approach it from the
front. Always turn on the unit within sight of the animal.
t)
This unit is for clipping animals only.
u)
Never shear wet animals!
v)
Do not turn on the unit if the blades are not attached.
w)
Before clipping, make sure that there are no solid foreign objects (e.g. pieces
of wood, wire, etc.) in the animal's coat. If present, remove them first.
x)
Do not touch the cutting surfaces with your hands! Keep a safe distance
between your hands and the cutting surface while working!
Publicidad
