Descargar Imprimir esta página

AudioSonic CL-1487 Manual De Instrucciones página 4

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 26
Action (during data adjustment):
-
Press << / MONTH-DAY / °C/°F button (17) to adjust data backward.
-
Press >> / YEAR / DST button (18) to adjust data forward.
-
Keep depress << / MONTH-DAY / °C/°F button (17) or >> / YEAR / DST button (18) button
for 2 seconds to enable auto backward/forward.
Setting alarm output and switching alarm on/off
-
Press the ALARM 1RADIO / BUZZ button (5) / ALARM 2 RADIO / BUZZ button (6) to
music
position to select wake up by radio, set to buzzer
by buzzer, set to alarm off position to disable the alarm.
-
Set the DISPLAY LIGHT DIMMER LOW / HIGH / AUTO OFF switch (20) to the AUTO OFF
position (the display will switch off automatically in 15 seconds). When the alarm
sounds, the display will automatically switch on again.
Alarm duration and snooze function
A. Alarm duration
Buzzer alarm or Radio alarm will continue output for 30 minutes if no key's are pressed,
then it will stop automatically and wait for same alarm time on the next day.
B. Snooze function
-
During alarming, press SNOOZE / SLEEP button (3) will enable snooze function, buzzer
alarm or radio alarm will stop.
-
Snooze interval is 9 minutes
-
Snooze will continue unless the ON / OFF button (4) is pressed to end the radio- or
buzzer alarm. The alarm will stop automatically after 30 minutes.
-
Set the DISPLAY LIGHT DIMMER LOW / HIGH / AUTO OFF switch (20) to the AUTO OFF
position (the display will switch off automatically in 15 seconds). When the alarm
sounds, the display will automatically switch on again. Press the SNOOZE / SLEEP button
(3) to enable the snooze function, stopping the alarm and turning off the display.
Change display content
Press the << / MONTH-DAY / °C/°F button (17) to switch to display the Month/Day, after 5
seconds timeout the display will switch back to time automatically.
Press the >> / YEAR / DST button (18) to switch to display the Year, after 5 seconds timeout
the display will switch back to time automatically.
Sleep function
When the radio is turned on, press the SNOOZE / SLEEP button (3) to turn on the sleep
mode. The sleep time will keep flashing for 5 seconds, during that time press the SNOOZE /
SLEEP button (3) again to change the duration from 90 to 15 minutes. Press the ON / OFF
button (4) to cancel the sleep function.
position to select wake up
GB-3

Publicidad

loading