Wiesenfield WIE-CLI-100 Manual De Instrucciones página 33

remove the air filter and clean it with the dry brush supplied (V). When
cleaning, secure the unit properly to prevent unwanted parts from
entering the system.
E. REPLACEMENT OF THE CUTTING HEAD (OPTIONAL)
The unit has a possibility to exchange the cutting head from standard one
to one adapted for cattle shearing. To replace the cutting head loosen the
bolts holding the head (II) and remove the currently mounted cutting
elements. Fit the appropriate attachment, oil the gears (VI) if necessary.
Tighten the head mounting screws (II).
F. STORING THE UNIT
Store the unit in a dry place and only in its dedicated carrying case. Do not
use the product if there is a suspicion of moisture getting into the
structure. Doing so may result in a system short-circuit or electric shock.
In case of suspected damage, contact the service center.