Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Support Bracket Installation
The solar panels in this system can be fixed parallel to the installation surface using the support brackets. Each module
requires the installation of at least eight support brackets to ensure the stability of the system.
Please use the support bracket kit to connect the solar panel, and fix the solar panel to the pre-installation surface
with the drill screws. If needed, please visit EcoFlow's official sales channel for the relevant purchase
information on the kit.
How to Install
Glued area
Use the mounting hole to fix the solar panel
Fix the support bracket and the solar panel.
in the pre-installation position
Package List
*A 400W solar panel needs at least 2 sets of support brackets
Bolt Installation
The solar panels in this system can be fixed on the bracket with a bolt kit. It is recommended that you place the
module vertically when using the bolts to ensure the stability of the system.
Please use the bolt kit to fix the solar panel on the bracket system. The applied torques are 16–20 N·m for M8 and
14–18 N·m for M6. You need to purchase the bolt kit yourself. Please select anti-corrosion stainless steel fas-
tening materials.
6
Publicidad
