be reached at any time. Make sure that the mains power ratings match the data on
the rating plate!
Prior to first use disassemble all elements and wash them.
INSTALLING THE APPLIANCE
A – Model RCSI-16/ RCSI-17
B – Model RCSI-18
C – Apply the lubricant here
6 – Refrigerating compartment
7 – Stirrer
8 – Refrigerating compartment guard
gasket
9 – Refrigerating compartment guard
10 – Valve stem
11 – Valve stem o-rings
a) Install the stirrer (7) inside the refrigerating compartment (6).
b) Seat the refrigerating compartment guard gasket (8) inside the compartment
guard (9).
c)
Slide the dedicated o-rings (17 – size 11x2) onto the valve stem (10).
d) CAUTION! For model RCSI-18: Slide the dedicated gasket (18) onto the mid stem
of the valve.
e) Align the resulting assembly with the opening in the opening of the refrigerating
compartment guard (9) and install the assembly in the opening.
12 – Lever
13 – Cotter pin
14 – Fasteners
15 – Dispenser gasket
16 – Dispenser lid
17 – Stem o-ring, mid size
18 – Mid stem gasket (model RCSI-
18)