Publicidad
Idiomas disponibles
Idiomas disponibles
F R OT H I N G M IL K T Y PE S
Experiment and Find Your Favorite Type!
Not all alternative milk brands froth the same
Whole Milk
Preferred milk type for creating a thick, creamy froth and the best
outcome for a latte or cappuccino.
Reduced Fat Milk
Creates a lighter foam due to lower fat content. Skim milk will create a
more stable foam that is easier to shape.
Oat Milk
Foam results vary based on different brands. Try using an oat milk based
creamer for better results!
Almond Milk
Creates smaller foam bubbles which will dissipate quickly. Try using an
almond based creamer for better results!
NOTE: Frothing results might vary for hot and cold milk.
L ET' S M AK E A HOT L AT TE O R
C AP PUC C IN O !
For a Hot Latte:
1. P lug the coffeemaker in.
2. E nsure that your whisk is properly
placed at the bottom of the frother
jar by clicking in place and securely
fastening it.
3. A dd the milk of your choice to the
latte line indicator in the frothing jar.
NOTE: Do not fill frothing jar past
lines for best froth outcome.
4. Place frothing jar on mount. Put lid
back on the frothing jar.
Latte coffeemaker_BVSTDC02B_22SEM1 (LA).indd 7-8
Latte coffeemaker_BVSTDC02B_22SEM1 (LA).indd 7-8
For a Hot Cappuccino:
1. P lug the coffeemaker in.
2. E nsure that your whisk is properly
placed at the bottom of the frother
jar by clicking in place and securely
fastening it.
3. A dd the milk of your choice to the
cappuccino line indicator in the
frothing jar.
NOTE: Do not fill frothing jar past
lines for best froth outcome.
4. Place frothing jar on mount. Put lid
back on the frothing jar.
English-7
5. Press the
button (depending on
your model). Ensure the LED is
illuminated and frothing will begin.
Frothing jar will stop automatically
once the cycle is complete.
NOTE: Do not fill frothing jar past
lines for best froth outcome. Do
not remove frothing jar from mount
mid-cycle. If removed, turn off
frother by pressing Hot/Cold button
again. Cycle will need to be
re-started if desired.
6. A dd frothed milk into cup.
NOTE: the use of a tall cup is
recommended to avoid splatter.
NOTE: Clean frothing jar after each use and wait a minute or so before
frothing again to allow the heater to cool down.
CAUTION: Please ensure to handle frothing jar by the silicone sleeve as the
bottom of the frothing jar gets hot. Do not touch frothing warming plate after
use as it is hot.
7. Lift the lid of the unit and pour the water in to the water reservoir to the
4-ounce mark. Discard any excess water.
8. P lace the reusable coffee filter (or standard 5-cup basket-style paper filter)
into the brew basket. Make sure the basket is properly placed in for the lid
to close.
9. U sing the hot side of the coffee spoon , add 2 scoops of coffee grounds
to the coffee filter. Move the shower head over the coffee filter and grinds
and close the lid. NOTE: If you want a mild coffee, put between 1 - 1 1/2
scoops of coffee grounds.
10. P lace the mug with the foamed milk under the brew head. Press the
button – ensure the LED is illuminated.
11. Wait until the brewing process is done and enjoy!
CAUTION: Do not open the reservoir lid until it has cooled down, hot steam
could come out.
English-8
5. Press the
button (depending on
your model). Ensure the LED is
illuminated and frothing will begin.
Frothing jar will stop automatically
once the cycle is complete.
NOTE: Do not fill frothing jar past
lines for best froth outcome. Do not
remove frothing jar from mount
mid-cycle. If removed, turn off
frother by pressing Hot/Cold button
again. Cycle will need to be
re-started if desired.
6. A dd frothed milk into cup.
NOTE: the use of a tall cup is
recommended to avoid splatter.
2022/10/13 9:41 AM
2022/10/13 9:41 AM
Publicidad
