Descargar Imprimir esta página

Oster BVSTDC02B Manual De Instrucciones página 13

Publicidad

Idiomas disponibles

Idiomas disponibles

L E T ' S M AK E HOT C O F F E E!
1.
Plug the coffeemaker in.
2.
Grab desired coffee cup or mug and fill with as much water as you would like coffee.
Tip: Taller coffee mugs work best to avoid any splashing during brewing.
3.
Pour water into the reservoir. Observe how much water your poured on the water ladder.
NOTE: do not pour above 16 oz. max fill line as water reservoir will overflow.
4.
Place reusable coffee filter in brew basket. Make sure the basket is properly placed in for
the lid to close.
5.
Using the HOT side of the coffee scoop
amount of water poured. Pour coffee grounds into reusable coffee filter.
NOTE: if you prefer bolder hot coffee, you can use an extra 1/2 - 1 scoop of coffee
grounds.
TIP: remove the coffee filter while filling with coffee grounds to prevent accidental spills
into the water reservoir
6.
Close the lid.
7.
Place the mug that was used to measure water under the drip spout. Press "
8.
Add in your favorite coffee mix-ins for coffee just how you like it. Enjoy!
Latte coffeemaker_BVSTDC02B_22SEM1 (LA).indd 11-12
Latte coffeemaker_BVSTDC02B_22SEM1 (LA).indd 11-12
, measure coffee grounds that correspond to
HOT BREW
Water
Scoop
8 oz
1
12 oz
16 oz
2
" button.
English-11
FA Q
Why is the hot brew or over ice button flashing?
Please wait until the button is no longer flashing before brewing your cup of coffee.
Why is my milk not frothing?
Make sure your whisk is properly inserted at the bottom of your frothing jar.
Ensure you're not adding milk past the latte/cappuccino line in the frothing jar.
Try using a different kind or brand of milk.
My iced or hot coffee isn't strong enough for my taste – what now?
Try adding an extra 1/2-1 scoop of coffee grounds.
Try using finer coffee grounds.
Try selecting the
setting for Hot Coffee, as this pre-infuses the coffee for best extraction.
Is the tumbler dishwasher safe?
No, the tumbler, lid and straw should be hand-washed only.
Why is there no ice left in my cup after brewing iced coffee?
Try using bigger ice cubes when making your iced coffee – these will melt slower and give you
ice in your drink for longer! Also be sure you have filled your tumbler all the way to the "ICE"
marking.
Why are there coffee grounds in my coffee?
You may have over-filled your reusable coffee filter with coffee grounds, and they could have
spilled over the top. Although this is uncommon, try using a little less grounds next time and that
should solve this problem! Decaf coffee can also cause grounds to spill over the top, try using
a little less grounds next time. Using a paper filter inside of the permanent filter can also cause
grounds to spill over the top.
Can I use a different tumbler or cup for making iced coffee?
Sure thing! Just ensure you keep the same ratio of water-ground-ice to create the best tasting
iced coffee!
Why does my coffeemaker continue to drip after the light turns off?
Using paper filters can cause dripping to continue for longer. We suggest using the included
nylon filter.
Why does HOT coffee come out for an ICED coffee?
The coffee maker for iced coffee works through a regular drip coffee extraction method; that is,
the coffee is prepared directly in the glass with ice, in this way it is cooled little by little until it is
with the perfect consistency for an iced coffee of a delicious flavor.
Coffee has to be prepared first before it can cool down; therefore, the coffee maker does NOT
prepare iced coffee but prepares regular hot coffee and pours it directly into the glass with ice to
make it iced later after it cools in the glass.
English-12
2022/10/13 9:41 AM
2022/10/13 9:41 AM

Publicidad

loading