Proline KTEA Manual De Instrucciones página 8

7. Press to start the tea brewing cycle.
• The light around the selected temperature button will flash and the light
around the
• The pull rod can be lifted to freely locate the tea basket and easily control the
soaking time for the optimum concentration tea.
NOTE: If the glass jug is removed from the power base during the brewing cycle, the cycle will automatically
cancel.
8. Once the selected brewing temperature is reached, the appliance will beep twice (repeat 3 times) and
the light around the selected temperature button will stop flashing and the light around the
button will go out.
BOILING OR HEATING WATER
The appliance can be used for boiling or heating water to a desired temperature.
NOTE: If you have used the appliance for brewing tea, it is recommended thoroughly cleaning the interior
of the jug before boiling or heating water.
1. Fill the glass jug with the desired amount of water. Do not fill over the water maximum mark (1.7L
WATER MAX).
2. To boil water, press the 100°C button.
To heat water to a desired temperature, press the 70°C, 80°C or 90°C button.
3. Press to start the cycle.
• The light around the selected temperature button will flash and the light around the
will illuminate.
NOTE: If the glass jug is removed from the power base during the heating or boiling cycle, the cycle will
automatically cancel.
4. Once the selected temperature is reached, the appliance will beep twice (repeat 3 times) and the light
around the selected temperature button will stop flashing and the light around the
out.
button will illuminate.
6
EN
button
button will go