Proline KTEA Manual De Instrucciones página 9

KEEP WARM
This function allows the brewed tea or heated water to remain warm for 2 hours.
To activate this function:
1. Press before or during the tea brewing or water heating cycle.
• The light around this button will illuminate, indicating the keep warm function has been selected.
• This function is only available when selecting the temperature 70°C, 80°C or 90°C to brew tea or
heat water.
2. Once the tea brewing or water heating cycle is finished, the light around the
illuminated, indicating the keep warm cycle is active for 2 hours while the glass jug remains on the
power base.
NOTE: The glass jug can be removed from the power base but please note if the power base cannot
detect the glass jug within 1 minute, the heating or boiling cycle and the keep warm function will be
cancelled.
To cancel this function, press
FAULT DESCRIPTION
• In case that temperature sensor has failed, all lights will flash. Unplug the appliance from the mains
socket and then plug in again.
• In case of dry burning, all lights will flash and the alarm will sound. Unplug the appliance from the mains
socket and fill the jug with cold water for cooling down.
CLEANING AND DESCALING
Ensure that turn off the appliance by pressing
around this button will go out.
Allow all parts of the appliance to cool completely before
disassembling and cleaning.
NEVER IMMERSE THE POWER BASE, GLASS JUG, POWER CORD
OR POWER PLUG IN WATER OR ALLOW MOISTURE TO COME IN
CONTACT WITH THESE PARTS.
again. The light around this button will go out.
7
EN
button will remain
. The light