Proline KTEA Manual De Instrucciones página 7

BEFORE USING FOR THE FIRST TIME
In order to remove any dust or protective residues from the manufacturing process, it is recommended to
run a boiling cycle and then discard the water.
1. Wash the tea basket and tea basket lid in soapy water with a soft sponge, rinse and dry thoroughly.
NEVER IMMERSE THE BASE OF THE GLASS JUG, THE POWER BASE, POWER CORD OR POWER PLUG
IN WATER OR ALLOW MOISTURE TO COME IN CONTACT WITH THESE PARTS.
2. Place the power base on a flat, dry surface.
3. Fill the glass jug with water to the water maximum mark (1.7L WATER MAX) and place on the power
base. Fit the jug lid onto the glass jug.
4. Plug the power base into the mains socket.
• The appliance will beep twice and all lights around the buttons will briefly illuminate then go out.
5. Press the 100°C button and then press
• The light around the 100°C button will flash and the light around the
6. Once the water reaches 100°C, the appliance will beep twice (repeat 3 times) and the light around 100°C
button will stop flashing and the light around the
7. Discard the water. The appliance is now ready to use.
BREWING TEA
1. Remove the glass jug from the power base and remove jug lid. Fill with desired amount of water.
2. Remove the tea basket from the pull rod of the tea basket lid by turning it
anticlockwise.
3. Fill the basket with tea leaves.
4. Attach the tea basket back to the tea basket lid by turning it clockwise until it locks
in place.
5. Fit the tea basket lid onto the jug and place the glass jug onto the power base.
6. Press a brewing temperature button. The light around the selected button will
illuminate.
Tea Type
Recommended
Brewing
temperature
to start the cycle.
Sencha (Japanese
Green Tea)
70°C
button will go out.
Green tea
Yellow tea Herbal tea
White tea
70°C -80°C 80°C
5
button will illuminate.
Oolong
Black tea
tea
80°C -
100°C
90°C
EN