CITYSPORTS CS-WP5 Manual Del Usuario página 11

ＥＮ
. MAINTENANCE
VI
REGULAR MAINTENANCE OF THE TREADMILL
STORAGE: Keep your equipment in a enclosed place, away from dust or humidity. Don't

store it neither in a garage or in a indoor backyard, or near the water. Humidity, dust and
water could damage it and have an effect on its functioning
ELECTRIC CABLE: Make sure that the cable and plug are in perfect conditions. Electric

cables must be away from hot surfaces
SCREWS AND CONNECTING CABLES: Supervise and tighten the screws on a regular

basis, because due to the vibration the screws and nuts tend to loosen.
LUBRICATION: It's a correct lubrication of the treadmill with silicon oil or
teflon is really important. This lubrication must be performed regularly
depending on its use even before the first use.a) The step to lubricate the running board
is as follows: (see the above figure)
b) Stop the running belt and fold the treadmill.
c) Turn over the running belt at the back of the main frame.
Insert the lubricant pot as deep as possible into the middle
of the running belt. Apply the lubricant onto the inner side of
the running belt. Lubricate both sides of the running belt.
After the lubrication is completed, start the machine at 1km/h to
let the running belt bring silicon all over the board.
After running for a period of time, the treadmill must be configured with special

cymene silicone oil for lubrication.
This product must be earthed. If the power cord is damaged,it
must be replaced with a manufacturer recommended power cord.
DO NOT TANGLE THE POWER CORD
Https://www.LikeSporting.com
- 9 -