EN
STEP 1
1.Carry out the machine from the package by two persons and place it lightly on flat floor,
and put other fittings beside the machine.
2.Lift up the upright tube according to the picture and lock it with 2pcs M10 knob screws at
two sides.
STEP 2
1.Put the console at right place as below picture shows, and lock it with 2pcs M8 knob
screws at two sides.
2.Adjust the pad holder to right angle, put safety key to right place, then can start to use
treadmill.
Https://www.LikeSporting.com
- 5 -