STEP 3
When you do not use treadmill, just unlock the 4pcs knob screws, fall down upright tube,lay
flat as below picture shows, and lock again 2pcs M10 knob screws at two sides.
STEP 4
STEP 4
1.Fold up the treadmill, turn around the supporting frame locker to horizontal place, the
supporting frame will extend automatically.
2. When need to use treadmill,collect the supporting frame back with foot and lock it with
the locker at vertical place, then fall down to floor, repeat the steps as above.
Https://www.LikeSporting.com
- 6 -
EN