Publicidad
Idiomas disponibles
Idiomas disponibles
A-4
A-3
C C - - 3 3
B B - - 1 1
A-5
-
A-8
11
Forward Facing Installation
Group 1 (9kg to 18kgs)
NOTE: It is best to fit your child into the seat prior to installation to ensure the
position of the headrest and the configuration of soft inserts is correct. Refer to the
Harness Adjustment section for detailed instruction.
CAUTION: The foam wedge (fitted behind the body insert) is suitable for newborns
and toddlers up until 13kg. It is at the user's discretion to decide when to remove the
wedge based on the independant growth of the child. It must however, be removed
once the child reaches 13kg.
1. Locate the ISO-FIX anchorage points in your vehicle, in the seat bite between the
vehicle back rest and seat surface as shown in image A-1.
2. Adjust the seat to be forward facing by squeezing the red rotation adjustment
handle with one hand and simultaneously rotating the seat with the other as shown
in image B-1. Once the seat is facing in the correct direction, release the red handle
to lock the position.
NOTE: The red rotation adjustment handle is located at the front of the base, just
slightly behind the support leg. Refer to the Car Seat Features section of your
A-6
manual for further instruction, the handle is listed as item 22.
3. Place the restraint into the vehicle and align it to be central with the ISO-FIX
vehicle anchorages as shown in image B-4. When central, extend the ISO-FIX
latches on the restraint by squeezing the red adjuster buttons and simultaneously,
sliding them to the maximum adjustment positions as shown in images B-2 and B-3.
NOTE: The buttons are located either side of the base and are directly behind
the ISO-FIX latch slots. Refer to the Car Seat Features section of your manual for
further instruction, the button is listed as item 7.
12
Publicidad
