Ickle Bubba RADIUS Instrucciones De Uso página 9

4. With the ISO-FIX latches extended, push the child restraint into the vehicle seat,
connecting each latch onto each vehicle anchor. Ensure each latch is connected
correctly, by checking that the ISO-FIX adjuster button's indicator has turned green
as shown in image B-4. To tighten the installation, once the latch indicator is green,
continue pushing the restraint's base into the vehicle seat until the base is as firm as
possible against the seat as shown in image B-4.
5. Adjust the support leg down so that the foot is contacting the vehicle floor and
the indicator is green as shown in image B-5. Ensure the base isn't unnaturally
pitched by the position of the support leg, it should only be in the first position that
allows contact.
6. Once installed, the seat's recline can be adjusted independently by squeezing the
black recline adjustment handle and sliding the seat into the preferred position as
shown in image C. Once the desired recline is achieved, release the handle to lock
the position.
A-1
B-1
13
B-2
C C - - 3 3 B B - - 1 1
B-4
C
14
B-3
B-5